civil 3d copy label styles from one drawing to another

Some fourth dimension ago, I posted about creating manhole callouts in contour view.  I got some good feedback and said that I would mail service more to information technology at a subsequently date.  Well I take finally got around to doing it today.  Below is footstep by footstep instructions on how to achieve this.  Enjoy!

Equally many of you know, the label style for structures used out-of-the-box (OOTB) are not very compliant to what is needed in a production environment. Near people prefer the structure callout to be at a 90-degree direction, at the bottom of the grid, and with a line projected from the eye of the bottom of the structure. That is what we are going to accomplish. Our finished production will wait similar the image beneath…

The first affair yous will want to do is re-create i of the existing styles from OOTB. In this example, I am copying the Name Only (Sanitary) characterization way from under Structure>Characterization Styles…

On the Data tab, give the style a name. I am naming mine Proposed Sanitary MH (Contour).

Now click on the General tab. Hither yous will assign your layer and text style. The but matter I am changing here is the text fashion. I am changing it to ROMAND. I am leaving the layer set to C-SSWR-TEXT.

Now click on the Layout tab. This is where the magic begins. Notice nether the Component name, the only component in the list is Structure Text. We will outset with that. The first thing we will practice is go to the Text Contents and beginning our label way. Click in the Value column, Contents row, under Text. An ellipsis will appear. Click the ellipsis…

This will open up the Text Component Editor. Highlight <[Proper name(CU)]> on the correct side of the dialog box and delete it. Yous should now take a clean, blank box. Place your cursor in the blank box and type PROP. SAN. MH, then hit the ENTER cardinal to start a new line of text. Type RIM ELEV. = …

At present click on the Properties pulldown and select Insertion Rim Summit. Click the arrow to insert it under the PROP. SAN. MH…

Place your cursor after the cord and hitting the ENTER key to start a new line of text. Blazon STA. [space]. Nether the Properties pulldown, select Structure Station, change the precision to ane, then click the arrow to insert it…

That'southward all we need for this part of the callout. Click OK. You will see the results to the right in the Preview box. Alternatively, yous can opt to place the offset after the station, but that usually is for the programme view callout.

At present we will put the flowlines (inverts) on the label. To do this, we need to create a new component. And so new component will exist Text for Each. Click on the pointer to the correct of the Component Proper name and select Text for Each…

In that location will be a dialog box that pops up to select the type. Select Structure All Pipes and and then click OK…

Under the General property for Name, modify the Proper name to Invert. For the Anchor Component, alter information technology to Structure Text. This volition anchor it to the text we only created prior to the flowline (capsize). Change the Anchor Bespeak to Bottom Left.

At present we volition create the text for the flowlines. Just like earlier, we are going to click on the ellipsis for the Text Contents…

Highlight the text "Label Text" and delete it. Notice there is a Format tab besides the Properties tab. Click on the Format tab and change the justification to Left. Click back on the Backdrop tab…

From the Properties pulldown, select Connected Pipage Inner Diameter or Width, alter the Precision to one and hit the arrow to insert it. Identify your cursor afterward the cord and type the quotation mark " [space] FL = …

Go back to the Properties pulldown and select Connected Pipe Invert Elevation, continue the Precision at 0.01, then hit the arrow to insert information technology. Identify your cursor at the cease of the string and striking the spacebar for a space, so type an open parenthesis ( …

At present, dorsum under the Properties pulldown, select Continued Pipe Direction then click the arrow to insert it. Identify your cursor after the string and type a airtight parenthesis ) …

Nosotros are now finished with this portion of the label. Click OK.

Yous will now need to alter the Attachment to Height Left. Discover that the flowlines are at present lined upward with the residual of the characterization…

The concluding, portion of this is to add another component for the line. And then nosotros will go back and tweak a couple of settings for the other components, every bit well as the Dragged State.

Under the pulldown arrow to create a new component, cull Line…

For the Name, rename it to Line Extension. Alter the Use End Point Anchor from Imitation to True. For the Cease Bespeak Y Offset, alter it to -iii.0000"…

If your characterization style looks like mine in the Preview pane, as shown above, then yous are doing everything correctly so far. If not, you will desire to backtrack to find out where y'all went wrong.

Dorsum nether the Component Proper noun, select Structure Text. This is the first component we created…

Under General, alter the Anchor Component to Line Extension and and then change the Ballast Betoken to Finish…

Under Text, change the Rotation Angle to 180.0000, the Attachment to Elevation Left, and the Y Offset to -0.1650. I am changing my color to Yellowish because that is my "proposed" pen color, and it works skilful with the ROMAND text way…

Nosotros are near there. All we have to do now is modify a couple of settings in the Dragged State. Click on the Dragged State tab. Once there, nether Leader, alter the Arrow Head Size to 0.0000". At present under Dragged Land Components, change the Display to As Composed…

Our label way is consummate. Click OK. Now allow's test this out! Create a profile with some structures, or employ an existing one. Add this characterization mode to the structures in profile view. In one case you add the label style to the structures, y'all should encounter this in profile view…

It'due south still not quite right. Do y'all happen to know why? Don't forget the Dragged State. Click on the label and take hold of the grip at the stop of the line. Turn on your Ortho, and drag the label to the bottom of your grid. And there you lot have it, a nice line from the BOTTOM of the manhole fastened to your text…

This label mode will also allow you lot to stagger the labels by calculation vertices to the line in dragged state. If you liked this article, and you would like to know how to stagger the lines, permit me know and I volition post it. Thanks for checking this out!

toneysumbracked1957.blogspot.com

Source: https://civil3dj.wordpress.com/category/civil-3d-tips-tricks/

Share this post